Dlink WiFi Extender Setup

Want to boost the coverage of your home network? Well, you can increase the WiFi network coverage with the D-Link range Extender Setup. It extends the existing signals of the router device to remove the dead zone areas at your home or office. It also helps in decreasing the interference and offering backward compatibility with WiFi devices. With the D-Link WiFi extender setup, you can configure and manage the setting of your extender device. To use the features of the D-Link range extender, you need to complete the D-Link WiFi extender setup. Here, in this article, you will get to know the simple steps for the D-Link range Extender Setup. Let’s get started.

Quick Steps for D-Link Range Extender Setup via WPS Method

Follow the below steps for D-Link range Extender Setup by using the WPS method:

  • Step 1: Firstly, place your D-Link range extender and router in the same room nearer to each other.
  • Step 2: After that, plug in your extender to the power socket.
  • Step 3: Thereafter, locate the WPS button on the router. Once you find it, press the WPS button.
  • Step 4: Now, you need to wait for some time until the LED light turns green.
  • Step 5: Once you have established a strong connection between the router and D-Link extender then the LED light turns to solid green.
  • Step 6: At last, unplug the D-Link range extender and place it in your preferred place where you face a poor internet connection issue.

Instructions for D-Link Range Extender Login

Go through the below steps for D-Link range Extender Setup login:

  • Step 1: Firstly, place your extender in an appropriate location.
  • Step 2: After that, connect your computer device with the D-Link extender using an Ethernet cable.
  • Step 3: Thereafter, plug the D-Link range extender into an electrical socket. Turn on your extender.
  • Step 4: Connect your extender to the wireless network.
  • Step 5: Open a web browser of your choice and enter http://dlinkap.local web address in the web browser.
  • Step 6: You can also use the IP address for the D-Link extender login. The default IP address for the D-Link extender is http://192.168.0.50.
  • Step 7: Fill in the default username and password in the D-Link extender login page.
  • Step 8: At last, click on the Login button.

Instructions for D-Link range Extender Setup Using Web Browser

Go through the below instructions for D-Link range extender setup by using the web browser:

  • Step 1: Firstly, you need to connect the D-Link extender to the computer or laptop by using the Ethernet cable.
  • Step 2: Launch the wireless utility on your computer or laptop whatever you are using.
  • Step 3: Choose the D-Link extender network. After that, enter the password for your network.
  • Step 4: Open a web browser from your device and enter the default web address in the address bar i.e. dlinkap.local.
  • Step 5: The alternative method to login to the extender is using the default IP address i.e., http://192.168.0.50.
  • Step 6: Once you reach the D-Link extender login webpage, fill in the default login credential details in the appropriate fields.
  • Step 7: Click on the login button.
  • Step 8: Tap on the Setup tab under the configuration web page.
  • Step 9: Now, you have to configure the wireless as well as security setting for the D-link range extender.
  • Step 10: At last, click on the close button to complete the D-Link range Extender Setup process. Now, reboot the D-Link extender device.

Troubleshooting Tricks for D-Link WiFi Extender Setup

During the D-Link WiFi extender setup, there is the possibility the user may face difficulty. To resolve these issues, you can perform the reset process. A simple reset of the D-Link extender can help fix the problem by deleting all the customized settings and configurations. Follow the below steps for D-Link extender reset:

  • Step 1: Before going ahead with the reset process, ensure that the D-Link range extender is turned on.
  • Step 2: Make sure to not to plug out the extender during the setup process. It may damage the D-Link extender device.
  • Step 3: After that, search for the reset button on the back panel of your extender.
  • Step 4: Now, press and hold the reset button for some time by using the paper clip or needle until the LED on the device lights up.
  • Step 5: Thereafter, the D-Link range extender will restart automatically and reset it to the factory default settings.
  • Step 6: Now, you need to configure the D-Link extender device once again.

Thus, by following the above-written steps, you can easily do a D-Link WiFi extender setup on your device. If you still face difficulty then contact the support expert team for the best advice and solution to the problem.