Extender Setup Archives - Wireless Extender Setup

Category: Extender Setup

November 24, 2021

Victony WA305 WiFi Extender Setup

Nowadays, the internet has become one of the major necessities of the people to fulfill most of their routine work. But the major issue faced by the users is to get the WiFi signals in all-around their place. Well, now it becomes easy with the Victony WA305 WiFi extender device. It is an amazing dual-band wireless extender known for delivering better signal strength. It helps in improving the WiFi signals that allow the users to enjoy continuous web series, movies and gaming without any fluctuations in internet signals. The two antennas that come along this device improves its performance by extending the WiFi signals to the dead spots. Let’s check out the steps for Victony WA305 WiFi extender setup.

Guidelines for Victony WA305 WiFi Extender Setup

The Victony WA305 setup means connecting your device to the complete WiFi solution for your home or office. There are different ways with which you can easily complete the Victony WA305 WiFi extender setup such as WPS method and web browser setup methods to remove all the dead spots from your home.

Victony WA305 WiFi Extender Setup via WPS

Carry out the below mentioned instructions for the Victony WA305 setup using the WPS method:

Step 1: The first step is to plug-in your extender into the electrical outlet nearer to the range of your router.

Step 2: Once your device is connected to the power supply, make sure that the power LED light on the extender turns to solid green color.

Step 3: After that, locate the WPS button on your extender. Once you find it, press the WPS button.

Step 4: Within 2 minutes, press the WPS button on your router.

Step 5: Now, you will see that the power LED green light starts blinking on your Victony WA305 extender or router.

Step 6: Wait for some time until your devices identify each other.

Step 7: Once you made the connection successfully, you will see that the LED light on the extender turns to solid green.

Step 8: At last, a pop-up message displayed on your screen saying the Victony WA305 setup is completed successfully. Thereafter, you can unplug your WiFi extender and place it where you face WiFi connectivity issues.

Victony WA305 Setup with a Web Browser

Follow the below steps for Victony WA305 WiFi extender setup by using the web browser:

Step 1: Firstly, connect your Victony WA305 WiFi range extender to the power supply by plug-it into the power socket. You do not need to place your extender closer to the router.

Step 2: Next, you need to wait for some time until your extender turns on. Thereafter, you will see that the power LED light on the extender turns to solid green.

Step 3: In the next step, open the web browser of your preference from your device whatever you are using such as computer, laptop or smartphone.

Step 4: Now, you need to connect your device with the extender’s network under the WiFi manager option.

Step 5: Once you are connected to the wireless network successfully, launch the web browser of your preference and type ap.setup in the address bar of the web browser. Click on the enter button.

Step 6: Thereafter, the system prompts you to enter the login credential details. Enter “admin” in both the fields. Click on the login button and it will redirect you to the dashboard.

Step 7: Follow on-screen instructions to complete the Victony WA305 WiFi extender setup process.

Steps for Victony WA305 WiFi Extender Firmware Update

Updating of the extender firmware means upgrading the extender to improve its performance. Follow the below steps to update the Victony WA305 WiFi extender firmware:

Step 1: Firstly, go to the official website of the Victony extender to download the latest firmware setup file.

Step 2: Open any web browser and enter ap.setup in the URL bar to visit the official website.

Step 3: Once you reach the login screen, enter the username and password for your Victony WA305 WiFi extender.

Step 4: In the next step, click on the settings and then tap on System tools.

Step 5: Hit on the Firmware Upgrade option.

Step 6: Now, you have to browse the downloaded firmware setup file and hit on the upgrade option.

Step 7: Next, reboot your extender.

Step 8: At last, a message displays on the screen saying the Victony WA305 WiFi extender firmware is upgraded successfully.

November 24, 2021

Victony WA1200 WiFi Extender Setup

Victony WA1200 WiFi extender is one of the ultimate devices with which you can boost the coverage of the WiFi signals to the long extent without connecting the several cables physically from the existing WiFi home router. It has a dual-band omnidirectional antenna used to boost the low WiFi signals. Through this device, you can boost the WiFi signal range from the existing wireless network. If you have purchased a Victony WA1200 WiFi extender and are looking for the user manual guide for the extender setup then scroll down and read this article to configure the Victony WA1200 WiFi extender setup.

How to Setup Victony WA1200 WiFi Extender via WPS?

Go through the below-mentioned instructions for the Victony WA1200 WiFi extender setup by using the WPS button:

Step 1: The first step is to plug-in your Victony WiFi range extender into the power outlet nearer to your router.

Note: It is suggested to place your extender in the same room in which you have placed the router and it should be 5-10 feet away in order to build the faster connection.

Step 2: Turn on your extender and wait for some time until the power LED light on the extender turns green.

Step 3: After that, press and hold the WPS button on your victony wa1200 WiFi extender for 3-4 seconds.

Step 4: Repeat the same above process on your router by pressing the WPS button on your wireless router.

Step 5: Now, you will see that a green power LED light starts blinking on the victony wa1200 wifi extender which indicates whether your router is configured or working properly or not.

Step 6: The victony WiFi extender and router will take hardly 12-15 seconds to recognize each other and establish the connection between each other.

Step 7: Once the connection has been established successfully then you will see that the WiFi extender will turn to the solid green color.

Step 8: Next, unplug your Victony WiFi range extender and move it to the place where you are facing the dead spots.

Note: If the WPS button does not work then reset your extender to the factory default settings. If you want to get the seamless WiFi connection then place your extender away from the electrical appliances.

Victony WA1200 WiFi Extender Setup via 192.168.10.1

Follow the below instructions for the Victony WA1200 WiFi extender setup using the IP address 192.168.10.1:

Step 1: The first step is to plug-in your Victony extender into the power socket. It is not essential to plug it nearer your router.

Step 2: After that, wait for some time until your extender boots up properly and a solid power LED light starts blinking on your device.

Step 3: Open WiFi on your wireless devices such as laptop, Mac, smartphone or WiFi enabled devices.

Step 4: Go through the WiFi list and then connect with your device to open the Victony network.

Step 5: Once you are connected, open the web browser on the same device and enter the IP address 192.168.10.1 in the address bar of the web browser.

Step 6: Now, you will be redirected to the Victony WA1200 WiFi extender setup webpage.

Note: In case, the IP address 192.168.10.1 does not work then reset your extender or change the web browser or you can use some different device.

Step 7: Follow on-screen instructions on your Victony browser setup.

Step 8: When the system prompts then choose the network that you want to extend. Choose the main wireless network that you want to extend.

Step 9: Next, you need to enter the password for your wireless internet.

Step 10: When your extender is connected with the router successfully then the WiFi light will turns to solid green on Victony extender.

Step 11: Unplug your extender and place it to such a location where you need the internet connectivity. Your extender may take around 60 seconds to boot up your extender.

Note: It is recommended to place the Victony WA1200 WiFi extender in the direct line of sight of the router and away from the big electronic appliances such as microwave.

November 12, 2021

New Extender Setup

Are you thinking of a Netgear wireless range extender setup in your home or office? Struggling with New Extender Setup? Facing issues in Netgear_Ext Setup? Don’t know what to do next? Well, you have reached the right page! Basically, a new extender setup is a solution to all of your network issues such as dead zones, weak signals, slow internet connectivity, and many more. Here, you will learn the simple and quick steps for the Netgear WiFi range extender setup in different ways. Let’s get the ball rolling.

Instructions for Netgear Wireless Range Extender Setup

Go through the below-mentioned instructions for the New Extender Setup by using the Netgear installation assistant:

Wireless Extender Setup Using Manual Method

Step 1: Firstly, connect your home wireless router to the extender.

Step 2: After that, open any web browser of your choice and go to mywifiext.net.

Step 3: Now, the Netgear installation assistant webpage is displayed on your screen.

Step 4: Follow on-screen instructions to connect your Netgear extender to the existing wireless network named Netgear_ext SSID.

Step 5: Next, unplug your extender and place it to the new location halfway between your home router and the dead zone.

Step 6: Plug in your range extender into the power socket.

Step 7: In case, your wireless router does not blink green or amber then you need to plug your extender into the electrical outlet nearer to your router and then try again to reconnect.

Step 8: In the next step, reconnect your computer, laptop, or mobile device to the new extender wireless network.

Step 9: Now, test the new extended wireless network range by moving the mobile or computer to the area where you are facing poor WiFi signals.

Step 10: At last, plug your extender into the power socket and wait for some time until the power LED light turns green.

Step 11: At last, a message is displayed on your screen saying the new extender setup is completed successfully. Now, you can enjoy a high-speed internet connection without any interruption.

Quick Steps for New Extender Setup through WPS Method

WPS method is known as the simplest method for the Netgear wireless range extender setup. Just follow the below steps for extender setup using the WPS method:

Step 1: Ensure that your Netgear range extender is turned on.

Step 2: After that, search for the WPS button on your printer. Once you find it, press the button.

Step 3: Press the WPS button on your existing wireless router.

Step 4: Now, you will see that the LED light on your device will turn to solid green which means that your router has been configured properly with the extender.

Step 5: Repeat the same process for the dual-band range extender.

Step 6: A pop-up message is displayed on your screen saying you are connected to the extender network. Make sure to use the same passphrase as that of your router’s network.

Step 7: Next, you need to check your extender manually for the default username and password.

Step 8: Finally, your Netgear range extender has been set up successfully.

Step 9: Try to connect your WiFi-enabled devices to the extended network named Netgear_ext SSID.

Step 10: Once you complete the above steps for Netgear_Ext Setup, you can enjoy a seamless internet connection all around your home or office.

Steps for New Extender Setup Using an Ethernet Connection

If your home wireless router does not support WPS then you can establish the Ethernet connection. Here are the steps for the Netgear wireless range extender setup through the Ethernet connection:

Step 1: Firstly, place your wireless router and extender in the same room.

Step 2: After that, take an Ethernet cable and connect your router and extender.

Step 3: Plug in your extender into the power socket and turn it on.

Step 4: Next, switch on your home router.

Step 5: In the next step, open any installed web browser from your computer or laptop.

Step 6: Enter www.mywifiext.net in the URL bar of the web browser.

Step 7: Now, you will see that the new extender setup webpage displays on the screen prompt you to enter the username and password.

Step 8: Enter the default login credential details for your Netgear extender.

Step 9: Click on the login button and then choose the WiFi network that you want to extend. Tap on the Continue button to proceed further.

Step 10: Next, you need to select the WiFi network that you want to extend.

Step 11: Enter the security settings for your chosen wireless network.

Step 12: Enter the network password in the passphrase field. Click on the continue button to proceed further.

Step 13: Wait for some time so that extender applies the setting changes.

Step 14: Finally, hit on the finish button to complete the Netgear_Ext Setup. Connect any WiFi-enabled device to the new WiFi network and enjoy a seamless internet connection in any corner of your home or office.

November 11, 2021

MSRM US754 WiFi Extender Setup

Do you want to extend the wireless network coverage of your existing WiFi router all-around your home or office? Want to boost the WiFi signals? If yes, then just feel relaxed and stop searching anywhere else. You have reached the right spot. With MSRM US754 WiFi extender, you can accomplish this but to achieve this, you just need to complete the MSRM US754 WiFi extender setup. Here, in this article, you will get to know the complete step-by-step instructions for the MSRM US754 setup.

Instructions for MSRM US754 WiFi Extender Setup through 192.168.10.1

Go through the below instructions step-by-step for MSRM US754 WiFi extender setup through the IP address 192.168.10.1: Opticover WiFi Extender Setup Without WPS

Step 1: Make sure that you have turned on your MSRM US754 WiFi range extender and it should be on a repeater.

Step 2: Plug in your MSRM extender to the power socket nearer to your wireless router where you actually need to access the web.

Step 3: After that, connect your computer, laptop, or smartphone to your extender either wired or wirelessly. For establishing the wireless connection, you need to go to the WiFi list.

Step 4: Thereafter, connect your extender to the MSRM network displayed in the WiFi list.

Step 5: For a wired connection, connect the repeater to the computer or PC through an Ethernet cable. Once you complete the setup then remove the cable.

Step 6: After connecting with the MSRM extender, you need to open the program and then enter either ap.setup web address or IP address 192.168.10.1 in the address bar of the web browser.

Step 7: Now, you will be navigated to the MSRM US750 extender setup webpage.

Step 8: Next, you need to enter the default login credential details in the respective fields. Enter “admin” for both username and password.

Step 9: Choose “repeater” from the modes shown on your screen. Choose the network of your desire that you want to extend. Also, enter the password for your chosen network.

Step 10: Follow on-screen instructions carefully. After that, you will see that your MSRM US750 WiFi range extender will start rebooting for approximately 1 minute.

Step 11: At last, connect any WiFi-enabled device to the extended network named SSID_EXT.

Guidelines for MSRM US754 Extender Setup through WPS Button

Follow the below-mentioned guidelines for the MSRM US754 WiFi extender setup by using the WPS button:

Step 1: The first step is to place your MSRM US754 in the same room in which you have placed your wireless router. Make sure to place your extender 5-10 feet away from your extender.

Step 2: After that, you need to toggle to set the extender to the “extender mode”.

Step 3: Now, you have to wait for some time until the power LED light on your MSRM US754 repeater turns active and stable. Thereafter, press the WPS button on it.

Step 4: Within 2 minutes, press the WPS button on your MSRM extender.

Step 5: Next, you will see that the blinking light on the wireless router and extender will stop flashing after 12-15 seconds.

Step 6: At last, unplug your extender and spot one of the dead spots to enhance the WiFi signals through the extender.

Steps for MSRM US754 Setup as an Access Point

If you want to set up your MSRM US754 setup as an access point then you need to have a long Ethernet cable. The access point basically implies that the extender will be associated with the LAN port of the router through Ethernet. It provides better web speed because there is less data loss due to the wired association. Here are the steps:

Step 1: Firstly, take an Ethernet cable and connect one end of the Ethernet cable to the LAN port of the router and the other end to the MSRM repeater.

Step 2: After that, connect your computer, laptop, or smartphone to the MSRM network in the WiFi list named wireless-AC or Wireless-N.

Step 3: Next, you need to open a program on the same device and enter the IP address 192.168.10.1 in the address bar of the web browser. Choose the access mode on your screen.

Step 4: Make sure to start the setup by setting up your extender to the AP mode.

Step 5: In the next step, you need to make a network SSID, password, and the security type for the AP mode.

Step 6: Complete the settings and wait for some time until your extender reboots completely.

Step 7: Now, you can connect various WiFi-enabled devices to your extender and can enjoy a seamless internet connection on your device without any hassle.

October 7, 2021

Extender.linksys.com

Do you want to perform Linksys extender setup? Facing difficulty in Linksys extender login? Unable to access extender.linksys.com? If the answer of these questions is yes, then you reached the right platform. Here, you will get to know each and every step-by-step instructions that help you in the Linksys extender setup. It is the best solution that helps you in strengthening the weak WiFi signal strength issues at home or office. Keep reading the article and follow the steps as mentioned for Linksys extender setup to boost the network connectivity and range. Let’s get started.

Instructions for Linksys Extender Login via extender.linksys.com

extender.linksys.com is the default web address used for Linksys extender login and setup. After logging in, you can change the WiFi range extender settings according to your preferences. Follow the below steps for the Linksys extender login through extender.linksys.com:

Step 1: Firstly, plug-in your Linksys WiFi range extender into the electrical socket. Turn on your extender by pressing the power button.

Step 2: After that, connect the home router by using the Ethernet cable.

Step 3: Now, you need to ensure that your wireless home router is turned on.

Step 4: Open any web browser of your choice from your laptop or computer.

Step 5: Thereafter, type extender.linksys.com in the address bar of the web browser. Click on the enter button.

Step 6: You will be navigated to the Linksys extender login web page.

Step 7: In the next step, enter the username and password in the respective field.

Step 8: At last, tap on the login button.

Simple Guidelines for Linksys Extender Setup

You can easily set up your Linksys extender in different ways. In this section, we have described the two ways for the extender setup. Go through the below instructions step-by-step for the Linksys extender setup.

Method 1: Manual Method

Here’s are the steps for Linksys extender setup manually:

Step 1: Firstly, you need to bring the computer or laptop and the extender in the same room.

Step 2: After that, connect your computer to the extender using the Ethernet cable.

Step 3: Thereafter, plug-in the computer and range extender into the power socket.

Step 4: Connect your device to the Linksys extender setup network.

Step 5: Enter extender.linksys.com in the address bar of the web browser.

Step 6: Next, you will see that a login web page will display on the screen.

Step 7: Enter the login credential details. Tap on the login button.

Step 8: Once the basic extender.linksys.setup screen displays then enter the network name (SSID) of the existing router in the appropriate fields.

Step 9: Choose the manual option and then switch off the extender for some time. Also, turn on the WiFi range extender properly.

Method 2: Using WPS Button

WPS is a security standard used for establishing the steady connection between your wireless device and extender. Go through the below steps for the Linksys extender setup via WPS button:

Step 1: Initially, insert the Linksys range extender into the power socket.

Step 2: Press and hold the WPS button on your extender.

Step 3: Next, check the WPS LED light on your device as it displays the status of the Linksys extender setup network.

Step 4: In case, the power lights on the WiFi range extender becomes visible then it means that the extender is configured with your wireless router.

Step 5: After some time, you will see that the LED light will change the color to a solid green.

Step 6: The solid green LED light on the device indicates that the WiFi extender setup is done successfully.

June 30, 2021

TP-Link RE210 Setup

Struggling with the dead zones in your home or workplace? Frustrated with the non-reaching of the wireless network to some areas? Want to boost the WiFi signals? Well, the TP-Link re210 extender can help you in resolving all of these issues. But for this, you need to perform the TP-Link extender re210 setup. If you do not know the steps for TP-Link re210 setup then this article might help you. Scroll down to read the article.

Know About TP-Link RE210 Extender

TP-Link re210 extender is an ultimate device that helps in boosting the wireless network to the dead zone areas in your home or office. It uses a dual-band wireless connection with a speed of up to 750 Gbps. After the TP-Link re210 setup, you can connect several devices and stream music, play online games and HD videos. It removes the inaccessible areas of homes or workplaces. This extender has high-performance external antennas. It enhances the performance by combining the bandwidth of 5GHz and 2.4GHz channels.

Simple Steps for TP-Link Extender RE210 Setup Using Web Domain

Go through the below steps for TP-Link extender re210 setup by using web domain:

Step 1: Firstly, you need to unbox the TP-Link re6300 WiFi range extender.
Step 2: After that, attach the antennas with the range extender. Also, make sure to set the extender in the appropriate direction.
Step 3: Thereafter, confirm the internet signals when the signals are not steady. Try to stable them.
Step 4: Now, unplug the router and connect the power adapter with the TP-Link re210 extender in working condition.
Step 5: Next, connect the computer, modem, and TP-Link re210 extender with the Ethernet port.
Step 6: Open any internet browser from your connected device. Enter either www.tplinkrepeater.net or IP address 192.168.0.254 in the address bar of the internet browser. Click on the enter button.
Step 7: A TP-Link re6300 extender login webpage displays on the screen where the system will ask you to enter the username and password. Enter admin as username and password.
Step 8: Next, select the region, country, time, and language on the TP-Link extender re210 setup wizard.
Step 9: Now, you can scan the QR code of the extender.
Step 10: Finally, the TP-Link re210 setup is successful.

Procedure for TP-Link Extender RE210 Setup Using WPS Method

Go through the below steps for TP-Link extender re210 setup by using the WPS method:

Step 1: The first step is to unbox the TP-Link re210 range extender.
Step 2: After that, connect the antennas with your extender. Make sure to place it closer to the router.
Step 3: Thereafter, check the internet signals. In case, it is not stable then fix it.
Step 4: Plug in your TP-Link re210 extender to an electrical socket.
Step 5: If the LED power light turns to green color then it means that your extender device is ready for the setup process.
Step 6: Also, check the power on your router device.
Step 7: Now, press and hold the WPS button on your TP-Link extender re210. Within two minutes, also press the WPS button on the router device.
Step 8: Now, your extender device starts catching the settings.
Step 9: Finally, the TP-Link extender re210 setup is completed successfully.

Guidelines for TP-Link Extender RE210 Setup via Tether App

Follow the below steps for TP-Link extender re210 setup through the Tether app:

Step 1: Unbox your TP-link re210 extender and attach the antennas with it. Place your extender nearer to the router.
Step 2: Ensure that you have plugged in the extender. Also, check the LED light on the extender. It will start blinking.
Step 3: Check the internet signals. It should be stable.
Step 4: Open the Play store from your connected device and search for the Tether app. Download the app.
Step 5: Search for the QR code on your extender device. Scan the QR code. It will initiate catching the settings.
Step 6: Finally, the TP-Link extender re210 setup is done successfully.

Thus, by following the above-mentioned steps, you can easily complete the TP-Link extender re210 setup on your device. However, if you face any difficulty then you can contact our professional team at our toll-free number.

June 30, 2021

How to Connect WiFi Extender to Router Without WPS?

Setup Extender to Router Without WPS

Have you purchased a new WiFi extender? Want to boost the WiFi network coverage and speed in your home or office? Do not have a WPS button on your router? Confused about how to connect WiFi extender to router without WPS? Well, if yes? You have reached the right place! Here, in this article, you will get to know the simple instructions for setup extender to router without WPS. The WiFi extender setup will help you in getting the best internet speed even in the deepest corner of your home or workplace.

WiFi Extender Setup

WiFi extender setup is known as the ultimate method to boost the current wireless network range and speed. A router is enough to reach the internet signals to cover a small home with a WiFi connection but it is unable to cover a large apartment or office. As a result, you are unable to stream the internet in dead zones of your home. In that case, a WiFi extender setup helps in resolving the problem. Once you complete the WiFi extender setup, the existing WiFi signals of the router rebroadcast to provide you WiFi in every corner of your home.

How to Connect Wifi Extender to Router Without WPS?

If you do not have a WPS button on your router then you can use the web-based extender setup method to connect WiFi extender to router without WPS. Look at the below steps to set up extender to router without WPS. You need to follow these steps carefully:

Step 1: Firstly, take an Ethernet cable. Attach one end of the Ethernet cable to the internet port of the extender and the other end to the internet port of the wireless router.
Step 2: If you have the same site system for some time and you have not set it up on your own then set up your WiFi extender.
Step 3: After that, connect the one end of the Ethernet cable to the extender’s LAN port and the other end of the Ethernet cable to the Ethernet socket of each of the devices that have a network connection.
Step 4: Launch a default web browser from your computer. Enter the IP address of your WiFi extender in the address bar of the web browser.
Step 5: Once you have entered the IP address of the extender, the router setup web page will display on the screen. Click on the wireless option and enter the wireless network name in SSID or network field. Tap on the Save button.
Step 6: In the next step, select the wireless protection and then choose the type of security like WEP. Enter the password for your network.
Step 7: Your choices might be different depending on the operating system that you are using.
Step 8: Next, unplug the Ethernet cables from the router and WiFi extender.
Step 9: At last, place your range extender within the range of the router.

By reading the above-mentioned instructions you will know how to connect WiFi extender to router without WPS. After the extender setup, you will not face any network issue and also your web browser will not close the internet connection during surfing. We hope that these steps will help you in setup extender to router without WPS without any hassle. All the guidelines are simple and easy to follow. Although if you have any doubt and have any technical queries hampering your experience then you can contact our support team by calling our toll-free number. Our support team is available all around the clock to provide you with the best solution to resolve your problem.

June 28, 2021

Netgear AC1200 WiFi Range Extender Setup

Want to boost the existing network range with a Netgear AC1200 WiFi range extender setup? Struggling in Netgear AC1200 WiFi range extender manual setup? Although Netgear AC122 setup is not a difficult task, still several users face difficulty in Netgear AC1200 WiFi range extender setup. If you are facing the same difficulty then this article might help you.

Simple Steps for Netgear AC1200 WiFi range extender setup Using Installation Assistant

Go through the below instructions for Netgear AC1200 WiFi range extender setup by using the installation assistant method:

Step 1: You first need to place your Netgear extender in the same room as that of your router.
Step 2: After that, plug the extender into the power socket and turn on your extender.
Step 3: Thereafter, open the WiFi manager on your computer or laptop and connect to the network of your extender.
Step 4: Launch any internet browser of your preference and enter mywifiext.net in the address bar of the web browser.
Step 5: Now, you will be navigated to the Netgear AC1200 WiFi range extender setup webpage where you need to enter the username and password for login.
Step 6: Once you enter the login credential details, click on the login button.
Step 7: The Netgear installation assistant will display on the screen. Follow the on-screen instructions to complete the Netgear AC1200 WiFi range extender setup process.
Step 8: At last, unplug your extender and place it in a new location of your choice at home but ensure to place it away from the radioactive devices including washing machine, microwave, cordless monitor, etc.
Step 9: Reconnect the wireless and wired devices to the extended WiFi network.

Guidelines for Netgear AC1200 WiFi Range Extender Manual Setup

Look at the below steps for Netgear AC1200 WiFi range extender manual setup:

Step 1: Turn on your Netgear AC1200 extender. Make sure to plug it closer to the router.
Step 2: After that, wait for some time until the power LED light turns to solid green color on your extender.
Step 3: Once the light of the extender is solid green, go to the wireless option on your Netgear AC1200 WiFi range extender device and connect with the wireless network.
Step 4: Next, you are connected to the Netgear AC1200 network. Now, visit www.mywifiext.net where you will see the New Extender Setup option.
Step 5: Click on the new extender setup button and create a Netgear Genie setup account. Click on the Next button.
Step 6: Choose the Access Point or WiFi Range Extender option.
Step 7: If you want your extender to work as a WiFi range extender then choose the WiFi range extender option otherwise access point.
Step 8: Follow on-screen instructions to complete Netgear AC1200 WiFi range extender manual setup.

Steps for Netgear AC122 Setup Using WPS Method

Installing the Netgear AC1220 extender by using the WPS method is the simplest and quickest method to connect the extender to the existing wireless system. Follow the below instructions for Netgear AC122 Setup:

Step 1: Firstly, plug in your Netgear AC1200 extender nearer to the router.
Step 2: Wait for some time until the power LED light turns to solid green on the extender.
Step 3: Press the WPS button on the Netgear AC1200 extender device. After that, a solid green light flashes on the screen.
Step 4: Push the WPS button on your home router. After 5 minutes, the WPS light on the Netgear extender will turn solid green.
Step 5: Now, you can place your extender to any location of your choice where you do not get a proper internet connection.

Congrats! By following the above-written instructions you can easily complete the Netgear AC1200 WiFi range extender setup without any difficulty. Once you complete the Netgear AC122 Setup, you can connect all of your WiFi-enabled devices to the network and enjoy the seamless and uninterrupted internet connection throughout your workplace and home including the backyard.

June 28, 2021

Linksys Velop Setup with Existing Router

Wondering how to set up a Linksys Velop Mesh WiFi system? Having trouble in Linksys Velop setup with existing router? Facing difficulty in accessing Linksys Velop login webpage? Well, here you will get the answer to all of these questions in simple ways. The Linksys Velop is a high-performing WiFi mesh system suitable for large homes and offices. It is the best replacement for the outdated extender and router. The Linksys Velop mesh WiFi system has a tri-band WiFi system that offers 100% WiFi signals throughout the office or home.

Instructions for Linksys Velop Setup with Existing Router

Before going ahead with the procedure, you need to make sure that you are using the latest available version application. Also, the mobile phones are connected with Velop’s wireless network. Follow the below instructions for Linksys Velop setup with existing router:

For Android Devices

Step 1: Firstly, visit the application dashboard and then tap on the Menu.
Step 2: After that, click on the “Advanced Settings” option from the displayed list on the screen. Then, tap on the “Internet settings”.
Step 3: Thereafter, click on the “Connection Type” and change the connection type to the “Bridge Mode”. Click on the Save button to apply the changes made by you.
Note: If you are not getting the Bridge mode option then it means you are using the older version connection. Update it as soon as possible.
Step 4: In the next step, tap on the “Enable Bridge Mode”.
Step 5: Your device will be disconnected during the time-saving settings.
Step 6: Once you complete the process, you will get the notification on your screen of settings saved successfully.

For iOS Devices

Step 1: Firstly, you need to connect your device with the WiFi network of Velop.
Step 2: After that, open the app and click on the “Manage your WiFi” option.
Step 3: Thereafter, you need to enter the login credentials details. You can also use the router password to log in.
Step 4: In case, you do not have an account then you need to create it.
Step 5: In the next step, select your network to go ahead. If there is not any account associated with Velop then you need to create an account.
Step 6: Next, you will see the dashboard of the application.
Step 7: At last, you will see the WiFi name on top of the list in the menu panel. After that, follow all the steps as that of the Android device.

These are some instructions for Linksys Velop set up with the existing router. One more thing that you need to remember is to use the latest version of the mobile application.

How to Set Up a Linksys Velop Mesh WiFi System?

In order to set up a wired Linksys Velop home mesh WiFi system, you need to connect the Linksys Velop nodes with the Ethernet cables. It helps in enhancing the connectivity and speed of the Velop system. Linksys Velop nodes use the wireless connection to set up using the Linksys application. Once you set up the node, you can easily connect Linksys nodes through Ethernet cables. Follow the below steps to set up a Linksys Velop mesh WiFi system:

Step 1: Firstly, you need to set up the primary nodes by taking the help of the Linksys app.
Step 2: After that, you are required to add the secondary nodes using Linksys app through the wireless setup.
Step 3: Once you complete the setup, move to the secondary node to the location where you want to place it, and after that connect it with any electrical socket.
Step 4: Connect the secondary node to the primary node by using an Ethernet cable. The nodes switch themselves on the Ethernet connection.
Step 5: If you want to add other nodes then use the Linksys app and set them to use the Ethernet cables to connect with other nodes.

That’s All! With these steps, you can successfully complete the installation of the Linksys Velop. These are the processes that help Linksys velop set up with existing router without any hassle. If you have any issues then you can contact the technical support team for better guidance in resolving the issues associated with the Linksys Velop setup.

June 23, 2021

Connect Netgear Extender to New Router

Struggling with the weak or no internet connection in some areas of your home or workplace? Do you want to connect Netgear Extender to new router? Are you looking for ways for the Netgear extender setup? If yes, then you have landed at the right place. Here, you will get all the steps associated with the Netgear extender setup. Let’s get started.

Introduction to Netgear Range Extender

Netgear range extender is a device that helps in boosting the wireless signals to a longer distance and extending the network coverage. It connects with the router either through a wired or wirelessly connection to extend the internet signals into the rooms that are wireless dead zones due to furniture obstructions, walls, or general spacing.

Steps to Netgear Extender Setup Using Netgear Installation Assistant

Follow the below steps to Netgear extender setup by using the Netgear installation assistant:

Step 1: Firstly, connect the home router to the extender.
Step 2: After that, open an internet browser of your choice from your device.
Step 3: Thereafter, go to www.mywifiext.net. It will navigate you to the Netgear installation assistant webpage.
Step 4: Follow the on-screen instructions to connect the Netgear extender to the existing WiFi network name Netgear_ext SSID.
Step 5: Unplug the Netgear extender and move it to a new location about halfway distance between the router and the area with a poor or weak WiFi signal.
Step 6: In the next step, plug the Netgear extender into the power socket.
Step 7: If the router LED power light does not green or amber, plug the Netgear extender into the outlet closer to the router. Try again.
Step 8: In the next step, reconnect the computer or mobile device to the new extender wireless network.
Step 9: Next, test the new extended wireless range by moving the computer or laptop, or mobile device to the areas that are having poor router wireless signals.
Step 10: At last, plug the extender into the power socket. Now, wait for some time till the power LED light turns green.

Unable to Connect Netgear Extender with the Router? Know the Reasons

There may be various reasons that you are not able to connect the Netgear WiFi range extender with the router. Here’s are the reason:

Wired or Ethernet connections might not be properly fitted in the power outlet.
The power LED light of the WiFi extender should be lit up.
Netgear WiFi extender is not ready and has been reset partially.
Outdated firmware of router and extender.
Poor internet connectivity
Placing the Netgear extender far away from the router.
Establish a poor connection.

These are the reasons that may create problems while connect Netgear extender to new router. If you are facing the same issue in connecting your Netgear extender to the new router then you can contact our professional experts at our toll-free for better guidance and immediate resolution of the problem at our toll-free number. Our experts are available 24×7 to answer your query in the best way.