Linksys RE7000 Setup – A Comprehensive Guide

The Linksys RE7000 extender is used by those customers who face issues with getting a strong wifi signal in certain parts of their homes. It is a very useful and powerful device that can help you make the most of your home’s wireless network. In this post, we will share with you a comprehensive guide about the Linksys RE7000 setup. This information will be able to help you handle this device’s setup on your own.

Linksys RE7000 Setup Step-by-Step Instructions

To successfully set up your Linksys RE7000, please follow the below-given steps:

  • Plugin your wireless extender into an electrical outlet.

  • Now, open your browser, and in the address bar type “extender.linksys.com” and hit enter.

  • The Linksys setup page should open now. If it does not, try switching to a different browser.

  • Once the Linksys extender setup page is open, it will ask you how you would like to set up the extender.

  • You can select either the Range Extender option or the Access Point option according to your need.

  • If you select the Access Point option, you can connect your extender directly using an ethernet cable.

  • Now use the IP address 192.168.1.1 and follow all the instructions exactly to complete your Linksys RE7000 setup

Linksys RE7000 Setup

Linksys RE7000 Setup Using WPS

Using WPS has to be the simplest method for setting up your Linksys extender. Once you know how to do it, it can be done by a novice as well. Follow these steps:

  • After unboxing the extender, connect it to a working power outlet.

  • For this method, you need to ensure both your extender and the wireless router are in the same room or proximity to each other.

  • Next, you have to wait for about 2-3 minutes till the orange light changes to green.

  • Then, press the WPS button on the extender.

  • Wait for about a minute and then press the WPS button on your primary wireless router.

  • Now, wait for a couple of minutes for the WPS indicator to turn green.

  • Your Linksys RE7000 Setup is now completed. You can unplug it and shift it to your desired location in your home.

Linksys RE7000 Setup

If your wireless router does not have a WPS button, you can log in to your router page and select the WPS option in the settings.

Updating the Linksys RE7000’s Firmware

From time to time, it is necessary to update your extender firmware. It ensures that the extender continues to function correctly. So, whenever there is a new firmware update available for your Linksys RE7000, you should install it. Below are the instructions on how you can easily update the Linksys RE7000’s firmware.

  • Use your desktop, laptop, or smartphone and open its browser.

  • In the address bar, type in “extender.linksys.com” and hit enter.

  • Then, you need to log in to the Linksys extender setup page.

  • Locate the option for Firmware Upgrade.

  • Once you locate the option, click on “Check for Firmware”.

  • Now, click on “Update”.

Linksys RE7000 Setup

Resetting Your Linksys RE7000 Setup

There are times when your extender may start showing glitches or it may stop working properly. In such a situation, it is recommended that you reset it. Resetting the extender usually takes care of various minor problems that arise with it. Follow these steps to accurately reset your Linksys RE7000.

  • The first step is to locate the reset button on your extender.

  • You can find it either on the back of the device or at its bottom.

  • When you locate it, you need to press it and hold it down for a minimum of ten seconds.

  • During these ten seconds, you will notice the lights on your extender start to blink and then go off. Then, they will start to come on again. You can release the button after ten seconds.

  • Finally, after you have reset the extender, you need to reboot it before starting to use it again.

Final Thoughts

In this post, we have given you well-detailed steps for Linksys RE7000 setup and its various other configurations. Though most of the time, by using these steps you will be able to successfully set up your extender. However, if you are still not able to complete any step or face any challenges, you should contact the experts that can help you with your Linksys RE7000 setup.