Get Setup

MSRM WiFi Extender Setup

Are you looking for the steps for MSRM WiFi extender setup? Struggling with the MSRM setup? Want to use the high-speed internet connection all-around your home or office even in the dead zones? Well, if the answer to these questions is yes, don’t panic! You have reached the right place. Here, in this article, you will get simple and easy guidelines for MSRM WiFi extender setup. Let’s go ahead with the setup process.


Simple Guidelines for MSRM WiFi Extender Setup

Before purchasing the MSRM WiFi extender device, it is good to confirm the dead zones in your home or office wherever you want to set up this device. To find the dead zones in an area, you firstly need to ensure that your existing WiFi router has a stable and active internet connection. If you choose such a type of dead spot where there is no signal at all then there is not any requirement of installing the MSRM WiFi extender.

Follow the below instructions step-by-step for MSRM WiFi extender setup:

  • Step 1: Firstly, plug in your MSRM WiFi range extender into an electrical socket. Turn on the extender device.
  • Step 2: After that, go to the WiFi selection screen from your wireless device such as laptop, mobile phone, tablet, etc. Select the MSRM option from it.
  • Step 3: Thereafter, launch any internet browser of your preference. Type IP address in the URL bar of the web browser.
  • Step 4: Now, you will be navigated to the admin page of the MSRM extender page.
  • Step 5: Now, the system will ask you to enter the login credential details to access the dashboard.
  • Step 6: Enter the login credential details. Fill admin as the username and admin as the password.
  • Step 7: Click on the login button.
  • Step 8: Next, you need to choose the Repeater mode. Choose the existing SSID or network name of your existing wireless network from the WiFi router which you want to extend.
  • Step 9: In the next step, you will get two choices either to create a new wireless network or use the existing network.
  • Step 10: Enter the credentials of your existing wireless network in the repeater SSID field. If you want to create a new network name then type a different name. Ensure that you have chosen the same password as that of your existing router.
  • Step 11: Tap on the connect button to save the entered details. After that, connect with the extended wireless network.
  • Step 12: Now, your MSRM WiFi extender is ready to use. Move your extender to the new place or dead spot where you want to use the internet connection.

Steps for MSRM WiFi Extender Setup via WPS

Follow the below steps for MSRM WiFi extender setup by using the WPS method:

  • Step 1: For MSRM WiFi extender setup, make sure to place your extender and router in the same room.
  • Step 2: Once the power LED light becomes stable then push the WPS button. After that, the LED light starts blinking.
  • Step 3: Within two minutes, the WPS button becomes enabled on the device. In case, the WPS button is disabled then login to your device and go to the wireless settings, and enable the WPS.
  • Step 4: Thereafter, you will see WPS light flashes on the extender and router for around 12 seconds.
  • Step 5: After the successful configuration of the WPS, the router will stop and the light on the WPS repeater will turn to solid green.
  • Step 6: At last, you will see that extender is showing up in the WiFi list as your network name.
  • Step 7: Unplug your extender and place it halfway distance between the router and the area where you need an internet connection.

That’s All! Hopefully, with the above-mentioned steps, you are able to complete the MSRM WiFi extender setup without any hassle. If you face any difficulty in MSRM setup then you can contact our professional support team at our toll-free number for better guidance.