How to Set Up a Netgear Access Point in Easy Steps

A Netgear access point is a device that is used to extend or repeat the wireless signal in your home. It is used in large homes and offices where the signal of the wireless router is not strong enough to cover the entire area. So, this access point is used to take the signal from the router and extend it to those places where the signal was originally weak or non-existent. These devices can be easy to set up for most people. The Netgear access point generally uses the wireless standards of 802.11ac, 802.11n and 802.11g. 

These devices can easily be connected with a switch or a router to boost their signal. The Netgear access point can also have some advanced features like creating multiple networks, guest access and multiple wireless security options.

Importance of Netgear Access Point Setup

There are several advantages of using the Netgear access point. Below are a few of them.

Extending the Wifi Coverage

By using the Netgear access point, you will be able to get wifi signals in those areas of your home where you previously did not. So, you will be able to use your devices in the entire home and not be bound by any limitations. 

Enhances Network Performance

If you place your access point in the right location, it will ensure there is no congestion or interference in the system and the performance of the network will improve. 

Create Separate Networks

You can use the access point to create multiple networks. It can help separate traffic as well as provide guest access to the network without having to share your private network’s credentials with anyone. 

Get Centralized Management

Netgear Access Point

If you are using several Netgear access points in your home, you can manage all of them using Netgear’s management software. It makes it easier for you to manage all of those devices from a single location.

Added Security

The Netgear access point has many great security features. This includes the WPA2-PSK that protects your network against any unauthorized access. 

Setting Up Your Netgear Access Point

By following these simple steps you will be able to configure and set up your Netgear access point with ease.

Netgear Access Point
  • Use an ethernet cable to connect your access point to a desktop or laptop computer

  • Power on the access point and wait for its lights to come on so that you know it has booted completely

  • Now, open your computer’s web browser and in the address bar enter the default IP address which is

  • You can also find the default IP at the bottom of the access point or in the user manual

  • Then, you will need to enter the default username and password of the device on the login page

  • This information can again be found in the user manual or on the device’s label

  • Once you have successfully logged in, you will then need to configure the wireless settings of the device from the admin menu

  • You can set the SSID as well as create a new password from the wireless settings

  • After you have made these changes, you can disconnect the ethernet cable connecting the access point to the computer

  • Now, you can place the access point at the best location for it from where it can receive the wifi signal as well as extend it to areas where you have no signal.

These above steps may vary based on the specific models of the Netgear access point you are using. We suggest you refer to the user manual or guide before carrying on with these steps. 

How to Setup Netgear Router as an Access Point?

There is a way that you can use your Netgear router as an access point to repeat or extend your wireless signal. Here are the steps you need to follow to use your router as an access point.

  • Connect your computer to the router using the ethernet cable

  • Then, open your web browser and enter the private IP of your device which is or

  • Enter your router’s username and password on the login page

  • Upon logging in, you need to disable the DHCP server in the Network Settings

  • This will allow the router to now work as an Access Point

  • Now, you need to match the wireless settings with the settings of your primary router including the SSID and password

Netgear Access Point
  • Next, assign an IP to the access point that is within the same subnet as your primary router

  • Save all the changes that you have made and then disconnect the ethernet cable from your computer

  • Then, connect one LAN port of your router being used as an access point with a LAN port of the primary router using the ethernet cable

  • Now, place the router in a place in your house where it can provide optimal coverage

Get Professional Help with your Netgear Access Point

By using the steps mentioned above, you will be able to set up your Netgear access point with ease. Also, we have shared with you how you can set up your Netgear router as an access point. If you are still not able to set up these devices on your own, it is best to contact our professionals that will be able to assist you promptly.