Netgear_Ext Not Showing Up
Is Netgear_ext not showing up on the network list even after completing the Netgear extender setup? Does your Netgear extender not working? If the answer is yes then don’t panic! You have reached the right place. Here, in this article, you will get some best troubleshooting tricks to resolve the netgear_ext not showing up issue. Let’s get started without any delay.
Know About Netgear WiFi Range Extender
Netgear WiFi range extender is one of the best devices used to boost the wireless signals and WiFi connectivity to a far distance within the network range. With this device, you can easily get rid of the dead zones. The WiFi range extender takes the incoming wireless signals from the existing router and amplifies them to reach all over the office or home.
Basic Reasons for Netgear_Ext Not Showing Up on Network List
Before knowing the ways to troubleshoot the Netgear_ext not showing up on the network list issue, it is essential to know the reasons for the occurrence of this issue. Here are the reasons for the Netgear_ext not showing up:
- Poor or weak internet service
- Improper Netgear WiFi extender setup
- Disabled network connection
- Place the extender far away from the router
- Using corrupted, faulty or outdated firmware

How to Fix Netgear_Ext Not Showing Up on the Network List?
Follow the below steps to troubleshoot the Netgear_Ext not showing up on the network list issue:
Solution 1: Get access to the stable and strong internet connection
There may be the possibility that the Netgear_Ext Not Showing Up issue is occurred due to a poor internet connection. To resolve this issue, you need to make sure to be connected to a fast internet connection. If you are unable to fix this issue then contact the internet service provider.
Solution 2: Update the Firmware of Extender
If you forgot to update the WiFi extender then your computer or mobile device starts buffering. To troubleshoot this issue, you are required to update the firmware of the extender. Here are the steps:
- Turn on the computer.
- Open any web browser and enter mywifiext.net in the address bar.
- Once you successfully login into the extender, go to settings and then navigate to the Administration section.
- If you found any firmware update then click on the firmware update option.
- In the next step, choose your model number of the range extender.
- Download the file. Once the downloading process is completed, upload it. You have to wait for some time until the device is not getting updated completely.
Solution 3: Maintain distance between the WiFi devices
If the router and extender are stuck to each other then place them at some distance away from each other. The distance between the router and extender should be close but it’s not too close that their WiFi signals clash with each other. So, make sure that there is an appropriate distance between the extender and router.
Solution 4: Perform Netgear Extender Setup Process Carefully
If you have followed all the above steps but unable to fix the issue then there is the possibility that you have made a mistake in setting up your extender. So, you need to ensure that you set your extender carefully. Consider these steps during Netgear extender setup:
- Refer Netgear manual for entering the default login credential detail of the extender.
- If the default web address does not work then use IP address 192.168.1.1 to access the Netgear Genie smart setup.
- Place your extender away from the metal objects, transmitting appliances, mirrors, fish tanks, etc.
Troubleshooting Tips to Fix Netgear Extender Not Working Issue
Follow the below steps to troubleshoot the Netgear extender not working issue:
- Solution 1: Make sure to keep the interference-creating appliances away from the extender such as Bluetooth speakers, microwave ovens, baby monitors, etc.
- Solution 2: WiFi extender gets slow when several WiFi devices are running on the same channel. To boost the speed of WiFi signals, try to change the channel number from your router’s settings.
- Solution 3: Ensure that your Netgear WiFi range extender is getting enough power supply.
- Solution 4: Always change the WiFi extender password and network name or SSID for security purposes and to get good WiFi speed.
- Solution 5: Reset the Netgear WiFi range extender to delete the old settings and to fix all the bugs.
- Solution 6: Cross-check the password when you enter the login credential details to avoid errors.
We hope that all the above-mentioned troubleshooting tricks will help you in resolving the Netgear extender not working and Netgear_ext not showing up on the network list issues.