Netgear Powerline 1200 Setup

Netgear Powerline 1200 Setup

The Netgear Powerline 1200 is a powerline networking kit created to increase the network’s range utilizing existing electrical wiring in your house or office. This technology provides a simple and efficient approach to increase the range of area covered by your network without the use of additional Ethernet connections or a difficult configuration.

Usually, the Powerline 1200 package comes with two adapters that resemble gigantic power connectors. One adapter fits into a power socket close to the source and is connected to your current modem or router. In a remote room or other network-deficient area, the second adapter is placed there. It has a speed of 1200 Mbps, and the below details will guide you on how you can do the Netgear 1200 powerline setup.

First, we start with the Netgear 1200 powerline setup done manually:

To start with the manual option, the following points are there that you need to follow:

  • Start by plugging in your netgear 1200 extender, and wait till the power light becomes green. Then you need to connect to the Netgear 1200 powerline adapter. Ensure that the distance between your extender and powerline 1200 must not exceed 20 feet. You can use the extension cord for things to be in place.

  • Now, you need to connect your Ethernet cable with the Netgear 1200 powerline adapter and router with each other. Your router must be on, and avoid using cables that are damaged.

  • Turn on your device and ensure that you use the updated software.

  • Then, enter or in the address bar.

  • Press enter key that will redirect you to the netgear 1200 powerline setup page.

  • Now provide the default name of the extender’s username and password, and follow the instructions on your screen.

Powerline 1200 Manual, netgear powerline 1200 manual

Once this setup is done, you can enjoy the uninterrupted speed of your internet from anywhere in your home.

Another method that we can use for the Netgear powerline 1200 setup is using WPS.

To use WPS for setting up the netgear 1200 powerline, you need to follow the below steps:

  • You need to ensure that your wifi extender and powerline 1200 are plugged in and are closer to one another. Do not put off your extender; it must be switched on.

  • On your Netgear powerline 1200 adapter, press the WPS button. Now, press the WPS button on your device which you would like to connect or pair with the adapter.

This method is completed, and you are now connected to the adapter using the WPS method.

There may be times when you will encounter errors while doing the setup of your Netgear Powerline 1200. To resolve this issue, we will guide you on some troubleshooting tips:

Are you unable to connect to your Netgear Powerline 1200? Then read further, and we will guide you on how you can resolve the setting-up errors:

  • You need to check the wall you have selected has a working socket that can easily establish a connection with your adapter.

  • A wireless connection will not be recommended in order to connect the devices. Doing so will prevent the wifi signal interference.

  • There must be no typing errors in the default address of the Netgear extender. If you are still facing the extender non-working, then clear out the browsing history and make sure you are not using the private window.

  • Check whether the extender is connected to your home wifi. Ensure that the default username and password must be correct.

  • Follow the Netgear Powerline 1200 setup instructions in the given manner.

If your Netgear Powerline 1200 is not offering you the best performance, then there might be an issue with the firmware updates. 

To get into the scenario of firmware updates, follow the given points below that will boost your extender’s performance:

netgear powerline 1200 extra outlet setup
  • First, you need to connect your router with the Netgear powerline 1200 through a wired secure connection. Other than this, ensure that the power LED is stable on both devices.

  • Now, visit the official website using

  • Locate it and click on downloads.

  • The page will appear to be a login extender page.

  • Enter the username and password for the extender.

  • Select settings, and then check for firmware updates.

  • Follow the instructions that you will see on the screen.

The firmware update will start on the same page. The device will be rebooted when the download is complete. So, try not to interrupt the process of the firmware updates. The process may take longer, so don’t turn off your extender and do not click on any other link. 

The above-written processes will help you to set up your Netgear powerline 1200 setup. If you face any other issues while setting up, you can call our expert then and there. Our experts are here to help you 24/7. Get in touch with us for immediate assistance.