Orbi Extender Jun30 Orbi WiFi Extender Setup Orbi Extender Setup Struggling in Orbi WiFi Extender Setup? Looking for the simple guidelines that help in Orbi setup? If yes, don’t fret! You have reached the right place. Here, in this article, you will get to know the simple step-to-step instructions for the Orbi WiFi extender setup. Basically, the Orbi WiFi extender is a networking device that allows the user to extend the WiFi network signals and coverage to a longer distance than any other router device can manage. But, to access the functionality of the Orbi extender, you need to complete the steps for the Orbi setup. After this, you can enjoy the fast-speed internet connection all-around your home or office. Quick Steps for Orbi WiFi Extender Setup Follow the below processes for Orbi WiFi Extender Setup that you need to carry out: Step 1: Firstly, you need to unplug the existing router or modem. Also, replace or remove the backup battery if any inserted in it. Step 2: After that, plug in your modem. Step 3: In the next step, search for the internet port on your Orbi router and connect your modem to the internet port using an Ethernet cable. Step 4: Next, connect the Orbi to the wall socket. Note: If the power LED light on the backside of the Orbi router does not glow then press the on or off button on the router. Step 5: The LED light on the router will turn to a solid white color. Wait for some time until it becomes stable. Step 6: Now, find a central location in your home where you can place your Orbi Satellite to receive the best WiFi signals and WiFi network coverage. You need to take care of the Orbi extender the same as the router as both devices are working together. Step 7: Connect the Orbi extender to the main power. Press the on or off button when you see Power LED light on the back side of the Orbi that starts blinking. Step 8: Now, take a look at the LED color Orbi satellite as the white solid light, in the beginning, will change to pulse magenta. The pulse magenta on the ring LED of the Orbi satellite blinks until the Orbi satellite syncs with the Orbi router. Step 9: At last, one of the three colors will blink for 12 seconds after the magenta light glowing up on the ring of LEDs of the Orbi satellite and then turn off. These colors are Solid Magenta, Solid Blue, and Solid Amber. Steps to Update Firmware on Orbi Setup Go through the below steps to update the firmware of Orbi WiFi Extender Setup: Step 1: Open an internet browser on your computer and enter http://downloadcenter.netgear.com in order to get the latest firmware for your Orbi WiFi extender. Step 2: After that, save the file on your computer device. Step 3: Next, tap on the “Manual Update”. Step 4: In the next step, search for the model name of your Orbi WiFi extender and select the checkbox that it gives along with it. Step 5: Tap on the “Update” button. Step 6: Thereafter, if you are asked to enter the admin password then enter the same password created by you for the Orbi router in the respective field. Step 7: Tap on the Browse option to find and upload the file that you have saved on your computer earlier. The process of uploading the file takes some minutes. Step 8: Once the file is uploaded, select the “Status” followed by checking the version of the firmware on the status page. The version of the firmware of the Orbi extender should be the latest. Hopefully, by following the above-mentioned steps, you can easily complete the Orbi WiFi Extender Setup successfully without any difficulty.