get Reset
get Setup

Setek WiFi Extender Factory Reset

Have you forgotten the login credential details of the Setek WiFi range extender? To recover the login credential details of the Setek WiFi extender, you need to do a Setek WiFi extender factory reset. If you don’t know the steps for Setek factory reset then don’t worry. We are here to help you. Here, you will get step-by-step instructions for doing the Setek WiFi extender factory reset. Let’s go ahead with the process.

netgear-powerline-1000-setup
netgear-powerline-1000-setup

Know About Setek WiFi Range Extender

Setek WiFi range extender is a device with which you can extend the WiFi network in your home or office. Basically, it is a remote access extender that places between the remote switch and the area where you need better remote access. A remote-access provider transmits the existing WiFi signals from the remote switch. This Setek extender has 4 high-speed antennas which ensure you get 300mbps of internet speed. With this extender, you can easily connect the smart tv, firestick, gaming console, etc. using an Ethernet cable.

Simple Guidelines for Setek WiFi Extender Factory Reset

Perform the Setek WiFi Extender factory reset if you forgot the password of the Setek WiFi extender. Setek factory reset will erase and clear all the data and applications. Once you reset your Setek WiFi range extender, you can easily recover the password. Look at the below step-by-step instructions for Setek WiFi Extender factory reset. Here’s are the steps that you need to perform:

  1. Firstly, find the reset button on your Setek WiFi range extender device.
  2. Once you find the reset button then press the reset button on your range extender device for 10-12 seconds.
  3. After that, you need to wait for some time until the LED power light turns red.
  4. Now, you need to wait for some time to reach the range extender.
  5. In the next step, you will find the default IP address. The default IP address is 192.168.50.
  6. Next, you need to tap on the management located at the right-hand side of the computer screen.
  7. A restored factory reset button will show to you. Click on the restore the factory button.
  8. Now, you will see a warning notification on your screen to confirm the factory default reset.
  9. At last, tap on the ok button. Click on the continue button to go further.
netgear-powerline-1000-setup

Finally, in this way, you can reset the Setek WiFi range extender with the router. All the steps are very quick and simple. The reset process will help in recovering the Setek range extender. Setek WiFi extender factory reset erases and disappears the data very carefully. That’s All! Hopefully, by following the above-mentioned steps, you can easily do a Setek WiFi extender factory reset without any hassle. It helps in recovering the password of the Setek WiFi range extender. After this, you will get a faster, reliable, and strong WiFi internet connection. However, if you have any doubt and face difficulties with your Setek WiFi range extender then you can contact our professional expert team at our toll-free number 24×7.