TP-Link Extender AC750 Setup

Are you facing issues with your internet connection? Looking for a solution to eliminating the WIFi signal dead spots? Well, in that case, the TP-Link AC750 WiFi range extender is an excellent device to eliminate the WiFi signal dead spots. TP-Link Extender AC750 Setup provides you with a comfortable internet connection in every corner of the house.

No technical knowledge is required to set up the TP-Link AC750 WiFi range extender. By following a few simple steps, you can quickly complete the TP-Link AC750 Extender Setup. If you don’t know how to set up the TP-Link AC750 WiFi range extender, then keep reading the blog and follow the below-mentioned steps. Let’s get started.

Methods to set up the TP-Link AC750 WiFi range extender

There are three methods to complete the setup of the TP-Link AC750 WiFi range extender:

  • Through a web browser.
  • Through a WPS button.
  • With Tether application.
Steps to setup the TP-Link AC750 WiFi range extender through the web browser method

Go through the below-mentioned steps to set up the TP-Link AC750 WiFi range extender through the web browser method:

Step 1: First and foremost, plug your TP-Link AC750 WiFi range extender into the wall socket near the router.

Step 2: Now, connect your WiFi-enabled device to the extender’s default network.

Step 3: After establishing the connection, launch any preferred web browser on your computer system and go to the official website of the TP-Link.

Step 4: Then, go to the login page and enter your user ID and password in the given field.

Step 5: In the next step, select your network from the list and enter the WiFi password. If your router supports a 5GHz network, then repeat the same procedure.

Step 6: Now, complete the same process and unplug your TP-Link AC750 WiFi range extender to place it on the new location.

Steps to set up the TP-Link AC750 WiFi range extender via a WPS button

Follow the below-mentioned steps to set up TP-Link AC750 WiFi range extender through a WPS button:

Step 1: First of all, Connect your TP-Link AC750 WiFi range extender into the wall socket and wait for a green light.

Step 2: Now, locate and press the WPS button on the TP-Link AC750 extender for two seconds.

Step 3: In the next step, press the WPS button on the router within two minutes after pressing the WPS button on the TP-Link extender.

Step 4: Within 10-15 seconds, your TP-Link extender will connect with the WiFi home router.

Step 5: When you see a solid LED light on the extender, unplug the extender and plug it halfway between the router and the WiFi signal dead zones.

Steps to set up the TP-Link AC750 WiFi range extender through the Tether app

In order to set up the TP-Link AC750 WiFi range extender through the Tether app, go through the below-mentioned steps:

Step 1: First of all, connect your TP-Link AC750 WiFi range extender to the wall power socket near the router and wait for a solid green light.

Step 2: Now, download the Tether app on your mobile phone or iPad.

Step 3: After that, go to the “settings” tab. From where, select the “WiFi” option.

Step 4: Then, move to the network list and connect your device to the extender’s network. 

Step 5: Next, open the app and create a password to configure your extender.

Step 6: Your TP-Link extender will scan for the network. Now, you need to select your network and enter the password. 

If you think TP-Link Extender AC750 Setup is too technical, then follow these steps and set up your TP-Link extender. If you are facing any issues with TP-Link AC750 Extender Setup even after following the above steps, then get in touch with our technical experts.