get setup

TP-Link RE220 Setup

Wondering how to perform TP-Link WiFi extender RE220 setup? We know that most of you have a TP-Link WiFi extender at your home or office but are facing difficulty in the TP-Link RE220 setup. Well, if you are also facing the same difficulty then don’t panic! We are here to help you. In this article, you will get to know the simplest and easiest way for a TP-Link WiFi extender RE220 setup. You just need to read the article till last.

Know About TP-Link RE220 WiFi Range Extender

TP-Link re220 WiFi range extender is a device with which you get the maximum wireless network coverage in your home or office. With this device, you can easily eliminate the dead spots in your home. Also, you can extend the speed of wireless signals up to 750 Mbps. After completing the TP-Link WiFi extender RE220 setup, the user can add many devices with it and can enjoy a high-speed internet connection.

Steps For TP-Link WiFi Extender RE220 Setup Through WPS

Look at the below steps for TP-Link WiFi extender RE220 setup by using the WPS method:

  • Step 1: Firstly, you need to open the packet of the TP-Link re220 WiFi range extender.

  • Step 2: After that, set the appropriate place for your extender.

  • Step 3: Now, examine whether the internet signals are active or not.

  • Step 4: Thereafter, connect the power supply with the TP-Link WiFi range extender.

  • Step 5: Check whether your TP-Link extender is receiving the full power supply or not. If it does not receive the power supply then you need to hold the on/ off button of the extender.

  • Step 6: In the next step, press and hold the WPS button on your extender and router. If the LED light starts blinking then it means it is being connected. It may take some time.

  • Step 7: At last, you can modify the setting of your TP-Link extender according to your requirements and enjoy its unique features.

Instructions For TP-Link WiFi Extender RE220 Setup Through The Web Domain

Look at the below steps for TP-Link WiFi extender RE220 setup by using the WPS method:

  • Step 1: Firstly, you need to open the TP-Link re220 range extender box. Place the extender at the appropriate place.

  • Step 2: After that, review whether the home networking is working fine or not.

  • Step 3: Thereafter, connect the power adapter with your extender. Check whether the power light of the extender is working or not. If it is not working then hold the on/ off button of TP-link WiFi extender re220.

  • Step 4: Next, connect the computer, modem, and extender by using the Ethernet cable.

  • Step 5: Launch any web browser and type www.tplinkrepeater.net or 192.168.0.254 IP address in the address bar.

  • Step 6: Enter the username and password as admin.

TP-Link WiFi Extender RE220 Setup
  • Step 7: A setup wizard will appear on your screen. Now, the user needs to enter the details such as time, country, region, and language.

  • Step 8: After that, the system will start scanning for the wireless network.

  • Step 9: In case, the scanning fails, then the user can enter WiFi. After, TP-Link RE220 setup, the user can cover the maximum area to extend wireless connectivity.

Procedure To Log Into TP-Link RE220 WiFi Range Extender

Follow the below steps for log into TP-Link re220 WiFi range extender:

  • Step 1: Firstly, open any internet browser of your choice.

  • Step 2: Type www.tplinkrepeater.net or 192.168.0.254 IP address in the address bar of the web browser.

  • Step 3: Once, you reach the login webpage then enter admin as the username and password.

  • Step 4: Click on the Login button.

  • Step 5: At last, you can access the settings of your TP-Link re220 extender.

Hopefully, with the above-mentioned guidelines, you can easily complete the TP-Link WiFi extender RE220 setup on your device without facing any difficulty. All the steps are easy to carry out. You just need to follow them exactly as they are written.