TP-Link WiFi Extender Not Working

Get Assistance

TP-Link WiFi Extender Not Working? What To Do Next?

Go through the below steps for TP-Link extender troubleshooting. You need to follow the below steps:

Have you purchased a new TP-Link WiFi range extender? Is your TP-Link WiFi extender not working properly? Facing connection problems with TP-link WiFi extender? Well, if the answer is yes then you are not alone who is facing these issues. There are many users who complain that their TP-Link WiFi extender not working. In this case, you are unable to connect with your TP-Link extender. Here, in this article, you will get simple and easy instructions for TP-Link extender troubleshooting. Let’s get started without any delay.

Check Power and Connection:

  • Ensure that the extender is properly plugged into an electrical outlet and receiving power. Check if the LED lights on the extender are illuminated.

  • Make sure the extender is within the range of your main router’s WiFi signal.

Reset the Extender:

  • If the extender is not responding at all, you can try performing a factory reset. Typically, this involves pressing and holding the reset button on the extender for about 10 seconds. Refer to the extender’s user manual for specific instructions.

tp link extender not working

Reposition the Extender:

  • Ensure that the extender is placed in an area where it can receive a strong WiFi signal from your main router and still extend the coverage to the desired area.

Connect to the Extender:

  • Use a device (e.g., smartphone, laptop) to connect to the extender’s WiFi network. The network name (SSID) and password can usually be found on a label on the extender itself.

Access the Extender’s Web Interface:

  • Open a web browser on your connected device and enter the default IP address of your TP-Link extender (e.g., 192.168.0.1 or 192.168.1.1) into the address bar. Refer to the extender’s manual for the correct IP address if needed.

  • Log in to the extender’s web interface using the default username and password (typically “admin” for both). If you’ve changed these credentials, use the updated ones.

Configure the Extender:

  • Once logged in, you can configure the extender’s settings. Ensure that the extender is set up correctly to extend your existing WiFi network. You may need to enter your main router’s WiFi network name (SSID) and password during this setup.

Update Firmware:

  • Check if there is a firmware update available for your TP-Link extender. If so, download and install the latest firmware to ensure optimal performance and compatibility.

Check for Interference:

  • Nearby electronic devices and physical obstructions can interfere with your WiFi signal. Ensure that the extender is away from potential sources of interference like microwaves, cordless phones, and thick walls.

wifi extender not working tp-link,

Test the Connection:

  • After configuring the extender, test your WiFi connection by connecting to the extended network and checking if the signal is strong and stable in the previously weak coverage area.

Contact TP-Link Support:

  • If you’ve tried all the above steps and your TP-Link WiFi extender still isn’t working, you may need to contact our customer support for further assistance or consider resetting and reconfiguring the extender from scratch.

That’s All! By using the above-mentioned steps, you can easily resolve the TP-Link WiFi extender not working issue. Although, if you have any issue or any query associated with the TP-Link WiFi extender then you can contact our professional technical team at our toll-free number at any time 24×7. Our professional technical team will help you in providing the best guidance to fix the issue