Tplinkrepeater.net

Do you want to get the steps for TP-Link repeater setup? Looking for the steps for TP-Link repeater login? Unable to access tplinkrepeater.net for repeater setup? If so, then you don’t need to go anywhere to search for the answer to these questions. In this article, we have described the simple step-by-step instructions for the TP-Link repeater setup. Basically, it is an amazing device through which you can easily extend the wireless network to the dead zones and can experience high-speed internet connection. Let’s go ahead with the TP-Link repeater setup steps. 

TP-Link Repeater Setup through Tplinkrepeater.net Link

Go through the below instructions for the TP-Link repeater setup through  tplinkrepeater.net web address:

Step 1: The first step is to plug-in your TP-Link repeater into the power outlet. Ensure to plug-in your extender to the electrical socket nearer to the range of the wireless home router.

Step 2: Turn on your TP-Link repeater and allow it to boot up.

Step 3: Next, launch the wireless utility manager on your system. 

Step 4: Thereafter, connect your system to the wireless network of your repeater through the default wireless network settings.

Step 5: Select the default SSID to connect with the TP-Link WiFi repeater. Enter the default password for the chosen repeater WiFi network.

Note: You can easily find the default TP-Link repeater WiFi details on the user manual that comes along with your device and the label attached with the TP-Link repeater.

Step 6: Launch any internet browser from your system connected to the WiFi.

Step 7: Go to the TP-Link default login web page by entering tplinkrepeater.net web address.

Step 8:  Now, you have to create and assign the login password for the security. 

Step 9: After that, you will see that TP-Link repeater starts searching for the available WiFi SSID. You need to choose the wireless network name. Enter the wireless network password to connect your repeater to the WiFi.

Step 10: In the next step, assign the SSID for your extended WiFi network. Set up wireless security.

Step 11: At last, tap on the Save button to apply the changes made by you in the extended wireless settings.

Step 12: Now, you can connect any of the wireless enabled devices to the TP-Link extended network. 

TP-Link Repeater Setup with WPS 

Look at the below steps for the TP-Link repeater setup by using the wireless protected setup up method:

Step 1: Firstly, you have to search for the WPS button on your router and repeater.

Step 2: Make sure to place your repeater nearer to the home router.

Step 3: After that, press the WPS button on your router. Within the 2 minutes, also press the WPS button on your repeater. 

Step 4: Now, you will see that the power LED light on your router and TP-Link repeater will start blinking. This process will take a few seconds to complete the process.

Step 5: Finally, you can connect wireless devices with your TP-Link repeater to enjoy high-speed WiFi on your device. 

Guidelines to Follow for TP-Link Repeater Login Using tplinkrepeater.net 

tplinkrepeater.net web address is the default web address used to set up and extend the wireless home network. Carry out the below steps one-by-one for TP-Link repeater login:

Step 1: Launch any internet browser of your desire from your computer or laptop that you have connected to the TP-Link repeater SSID.

Step 2: After that, type tplinkrepeater.net in the address bar of the internet browser. You can also use the IP address 192.168.0.254 if the above-mentioned web address does not work for you to access the repeater setup page.

Step 3: Next, you need to enter the default username and password for the TP-Link repeater setup page. 

Step 4: If you have entered the correct details then you will redirected to the admin access and reach to the TP-Link repeater setup webpage.

Step 5: Here, the user can complete the TP-Link repeater setup and easily extend the wireless network.