Victure WiFi Extender Setup

Victure WiFi range extender helps to extend the WiFi signals throughout the dead zone areas. This WiFi range extender provides high-speed internet and stable signals with dual-band. You can complete the Victure WiFi Extender Setup either through WPS or through the web domain. This WiFi range extender eliminates the dead zone and helps to remove the buffering while you are working online. You can enjoy uninterrupted streaming, gaming, surfing, and broadcasting with the Victure Range Extender Setup. Due to the universal compatibility of the Victure WiFi range extender, you can use it as a wireless bridge to connect iPhone, iPad, and Android devices.

Simple steps to set up the Victure WiFi range extender via the web browser

Follow the below-mentioned steps to set up the Victure WiFi range extender through the web browser method:

Step 1: First of all, plug your Victure WiFi range extender into the power socket and hold on for 40 seconds until the LED lights turn on.

Step 2: Once you see the LED lights, connect your device to the wireless network SSID wireless-xxxx. No password is required.

Step 3: After connecting the device, launch a preferred web browser on your device and go to the official website of Victure extender.

Step 4: On the login page, enter “admin” as username and password and press the enter button.

Step 5: Then, on the setup page, choose your language and click on the enter button.

Step 6: After that, go to the settings page, from there, select your WiFi router.

Step 7: Now, enter the password for your WiFi network and click on the next button.

Step 8: Finally, to finish the Victure WiFi range extender setup, click on the button at the bottom of the setup page.

Step 9: Once you are done with the setup of the Victure WiFi range extender, restart your extender.

Simple steps to set up the Victure WiFi range extender via WPS

If you feel that the web browser method is tricky then follow the WPS method to set up the Victure WiFi range extender. The WPS method is the easiest method to set up the extender. Follow the below-mentioned steps to set up the Victure WiFi range extender through the WPS button method: 

Step 1: First of all, unbox your Victure WiFi range extender and plug it into the wall socket to turn it on.

Step 2: After that, press and hold the WPS button on the Victure WiFi range extender for 2 minutes.

Step 3: Then, press and hold the WPS button on the router within 2 minutes after pressing the WPS button on the Victure WiFi range extender.

Step 4: The LED light will start blinking on the Victure extender which indicates that the Victure extender is successfully connected to the router.

These are the simple and easy steps for Victure WiFi Extender Setup. Hopefully, by following the above steps you can easily set up your Victure WiFi range extender. Victure Range Extender Setup amplifies the WiFi range coverage and gives a strong and reliable WiFi signal coverage.