Wavlink AC600 Setup
Do you want to improve the WiFi connectivity and wireless range of your existing wireless router? Facing difficulty in making outdoor wireless connections? Frustrated with the weak or poor WiFi connectivity? Well, with Wavlink AC600 range extender setup, you can easily resolve the above-mentioned issues. If you don’t know the steps for wavlink ac600 setup, then scroll down and check out the steps.
Instructions for Wavlink AC600 Range Extender Setup
Go through the below mentioned instructions for Wavlink ac600 setup on your device. You need to follow all the instructions carefully without making any mistakes. Here are the steps:
Step 1: the first step is to place your device on the WiFi AP/ Router by placing the clips into the given holes.
Step 2: After that, insert the cable into the holes which are present at the center of the holder.
Step 3: Thereafter, take the 2.4G and 5G antennas and then screw them in their respective slots on the top of your wireless router.
Step 4: Next, unscrew the bottom plastic cover. Also, detach the Ethernet cable connecting with the router.
Step 5: In the next step, plug-in one end of the LAN cable into the wireless router and the other end into the POE converter.
Step 6: Connect the power adapter coming with your device to the POE converter and to the power outlet.
Step 7: By the above steps, you can complete the Wavlink ac600 setup as the router.
Step 8: Once you complete the extender installation correctly, your wireless router will boot up. You will see that the power and WiFi LED indicator light will start glowing green.
Step 9: Ensure that you have connected one end of the Ethernet cable of POE converter to your appropriate device.
Step 10: Launch any web browser and enter 192.168.2.1 IP address and ap.setup in the URL bar of the web browser.
Step 11: Now, the system will prompt you to enter the username and password for your Wavlink extender. Login to your device to connect with the router.
Step 12: Next, you need to enter the wireless router setup interface. Tap on the router wizard to start the setup process.
Step 13: Ensure that you have selected the Dynamic IP address. You can provide SSID according to your desire for both 2.4G and 5G networks.
Step 14: Change your security type to WPA2 Personal from Open. Enter the password in the WiFi field.
Step 15: Tap on the Apply button to save the changes made by you. It will take some time.
Step 16: At last, the access point will start rebooting and you can see your device is connected to wireless connection successfully.
Steps to Update the Firmware of Wavlink AC600 Extender
Everytime, there is a need to make a new update to the firmware of the extender to improve the performance as well as stability of your Wavlink extender. Follow the below steps to update the firmware of Wavlink ac600 WiFi range extender:
Step 1: Firstly, open any web browser on your device and go to Wavlink extender official web page by entering wavlink.con in the address bar of the web browser.
Step 2: After that, you need to download the required firmware update. Make sure to download the firmware and save it to your computer or laptop.
Step 3: Once you complete the download process, extract the downloaded ZIP file.
Step 4: Next, tap on the “Setup” icon displayed on the bottom bar in the setup wizard interface of your web browser.
Step 5: In the next step, hit on the “Update Firmware”. Click on the “Browse” option and then choose the file that you have extracted previously.
Step 6: Click on the “Apply” button and wait for some time until the entire process is completed successfully.
Step 7: Now, the router will start rebooting.
Step 8: Finally, the firmware of the Wavlink ac600 range extender is updated successfully.