Get setup

Wavlink Repeater Setup

Are you using the Wavlink repeater for the first-time? Well, for this you firstly need to complete the Wavlink repeater setup on your device. If you don’t know how to perform WavLink WiFi Extender Setup, then you don’t need to be worried as you have reached the right place. Here, in this article, you will get to know the simple and easy instructions on how to complete Wavlink WiFi extender setup on whatever device you’re using. It will help you in resolving the internet-related issues and dead zones in your home. Let’s get started without any further delay. 

Instructions for Wavlink Extender Setup

There are different methods by which you can easily perform Wavlink extender setup. You need to scroll down and read all the instructions carefully to eliminate the dead spots whether using the WiFi connection. After completing the Wavlink extender setup, you can configure your device with the router. 

Method 1: Using Manual Method

Follow the below steps to install the Wavlink extender using the manual method:

Step 1: Firstly, plug-in your Wavlink extender nearer to the modem or router.

Step 2: After that, check whether the power LED light is blinking on your device or not. If the light is blinking then it means that you have established the connection successfully.

Step 3: Thereafter, take any WiFi enabled device such as phone, laptop or tablet.

Step 4: Access the settings from your WiFi enabled device and then tap on the WiFi option.

Step 5: Now, you will see that a network name Wavlink Extender setup_ext displayed on your screen.

Step 6: Connect your device with the “EXT” network.

Step 7: Launch any internet browser from your device and enter ap.setup in the URL bar of the web browser. Make sure that the internet browser that you are using should be updated to the latest version.

Step 8: Next, you will see a new extender setup web page displayed on your screen.

Step 9: Follow on-screen instructions for Wavlink extender setup to install or connect with your extender device.


Method 2: Through WPS Method

Go through the below steps to set up your Wavlink WiFi extender with the Wireless protected setup method. Here’s the steps to connect the repeater to the existing WiFi network:

Step 1: Initially, place your Wavlink extender nearer to the main router or modem.

Step 2: After that, turn on your Wavlink WiFi range extender.

Step 3: Now, you have to wait for some time until the power LED starts blinking or becomes solid green.

Step 4: Once the power LED light starts blinking, press the WPS button on your extender.

Step 5: Go to your router and press the WPS button on your modem or router.

Step 6: You will see that a stable green light starts blinking on the router and extender. Now, you have to wait for some time until your extender syncs with the home wireless network.

Step 7: Finally, the Wavlink extender setup process is completed successfully. Login to the Wavlink repeater page to complete the installation of your extender device.