Belkin N600 Setup

Are you trying to perform wireless setup for your Belkin range extender? Having an issue in belkin n600 db wireless range extender setup? If the answer is yes then you have landed on the right spot. Here, you will get to know the complete procedure for the belkin n600 setup wired and wirelessly. Check out the steps by going through the article till the end.

Steps for Belkin N600 DB Wireless Range Extender Setup

Go through the below instructions step by step for Belkin n600 db wireless range extender setup using WiFi:

Step 1: Firstly, use a power outlet which is placed near to the edge of your wireless router’s network area. 

Step 2: After that, plug in your Belkin extender into the power outlet. Switch it on.

Step 3: Connect any wireless enabled device with your extender.

Step 4: Tap on the WiFi icon and then tap on the network settings. Now, search for the belkin.setup and connect your device to it.

Step 5: Next, launch an internet browser like Google Chrome, Firefox or Safari on your computer. Go to belkin.range and then follow on-screen instructions displayed on your computer screen. 

Step 6: If you want then you can go to the URL bar and enter 192.168.206.1. It will redirect you to the Belkin range extender setup page. Tap on the initial setup page and then it will start searching for the network (SSID) at your home. 

Step 7: Connect your device to the wireless home network of the router. Tap on the next button. Enter the password of your chosen wireless network if required. The whole process will take some time to check the network credentials. A new webpage displayed on the screen confirms the network name of the newly configured extended network. Tap on the continue button. 

Step 8: A pop-up message will be displayed on your screen saying, your extender is now configured. Click on the next button to proceed further. 

Step 9: Now, your extender is configured successfully. 

Instructions for Wired Belkin n600 Setup

Go through the below instructions for the wired belkin n600 db wireless range extender setup. You need to follow the below steps for the wired extender setup:

Step 1: Firstly, place your extender nearer to the wireless network router.

Step 2: After that, plug-in the Belkin n600 range extender into the power outlet using a power cable.

Step 3: Press the power button and wait for sometime until rebooting is completed.

Step 4: Ensure your device is connected to the wireless network. 

Step 5: Plug-in your extender into the computer using network cable or LAN. You can use any LAN ports available on your extender. 

Step 6: At last, a pop-up message displayed on your screen saying belkin n600 extender setup is completed successfully. 

Troubleshooting the Belkin n600 Extender Setup Issues 

If you are facing the issues in connecting your Belkin n600 extender setup then go through the below step to resolve the issue:

Step 1: Try to use the Ethernet cable to connect your computer and Belkin range extender. Open the internet browser in your system and let your system take some time to recognize the Ethernet LAN connection.

Step 2: Make sure the Ethernet cable that you are using is connected properly to the extender and computer. The LED lights blinking on the extender should be lit up. In case, you find that the Ethernet light is not lit up then disconnect the power cable and plug-it again. 

Step 3: Relaunch the internet browser on your computer. Make sure that the internet browser that you are using is updated to the latest available version. 

Step 4: Make sure to enter the correct web address in the address bar for the Belkin n600 range extender setup. 

Step 5: Try to use some other web address for accessing the Belkin n600 range extender setup.

Step 6: Reset your extender to the factory default settings.

Reset Belkin n600 db Range Extender 

In case, your Belkin n600 range extender is creating issues then you can resolve the issue by resetting your extender to the factory default settings. Here’s the steps to reset the extender:

Step 1: Firstly, search for the reset button on your Belkin n600 range extender. You will find the reset button at the backside of the extender. 

Step 2: Use a paperclip or needle to press the reset button on your Belkin n600 range extender. Release the button after 10-15 seconds when blue WiFi LED light starts blinking on your device. 

Step 3: The new WiFi connection and new SSID for belkin setup will appear on your computer screen. Click on your wireless extender network to connect with it.

Step 4: Once you are connected with the wireless network then right-tap on the network with which you are connected on your system. Hit on the properties. Here, you will also find the IP address of your Belkin n600 range extender. 

Step 5: In the next step, tap on the setup page to initiate the extender setup process on your computer or laptop.

Step 6: By these steps, you will perform the extender factory default reset on your device. Once you complete the extender reset, set up your Belkin n600 range extender once again on your device.