Ap Setup | Ap Extender Setup | Ap.Setup

Get Setup

How to install extender using Ap.Setup

Do you want to extend the range of your existing WiFi router? Are you facing issues in connectivity with your internet connection? If so, then the WiFi range extender will help you in resolving these issues. Have issues in accessing the ap.setup web address? Want to perform an AP setup wizard? Basically, ap.setup is the web address mainly used to configure the WiFi extender. In this article, we have shared the step-by-step guidelines for the ap.setup on your device. Let’s get started and check out the steps for the Ap.setup Extender login. 


Simple Instructions for ap.setup Extender Login

Ap.setup website helps you log in to your Netgear WiFi range extender. Before proceeding further, you need to ensure that you have an active and high-speed internet connection. Follow the below steps for Ap.setup Extender login through AP setup wizard:

http ap setup
  • Step 1: Firstly, you need to plug in your extender. Make sure to place your extender nearer to the wireless home router. They should either be in the same room or 5-10 feet away from your home router.

  • Step 2: After that, connect your devices such as computer, laptop, or phone to the WiFi extender. 

  • Step 3: Your device shows “Wireless-N” for 2.4GHz and “Wireless-AC” for 5GHz. 

  • Step 4: Next, go to the WiFi list and then connect with either one of the networks shown in the displayed list. 

  • Step 5: Once you are connected and open the browser then you will see that the ap setup wizard will display automatically. 

  • Step 6: In case, the ap setup wizard does not displayed on the screen then launch any web browser and enter either http://ap.setup or IP address in the address bar of the web browser.

  • Step 7: Now, you will navigate to the extender login webpage.

  • Step 8: Tap on “choose the method for extender setup” on the setup page such as access point or extender. Choose any option according to your desire.

  • Step 9: Once online steps are completed, unplug your device and place it where you are facing the internet connectivity issue.

Steps For Ap.Setup Using WPS Method

Look at the below steps for the ap.setup by using the WPS method. You need to follow the steps carefully one by one:

  • Step 1: For the ap.setup, you firstly need to place the extender in the same room in which you have placed the wireless home router. The reason behind this is if you place it far away then you will face issues in connecting your extender to the router or take more time in the configuration process.

  • Step 2: After that, search for the WPS button on your extender. Once you find the button, press the button for 5-6 seconds and then release the button. Thereafter, you will see that power LED light starts blinking on it.

  • Step 3: Within 2 minutes, press the WPS button on your router.

  • Step 4: In case, the WPS is disabled on your router then you need to login to your router. Click on the wireless settings and then to the WPS. After that, enable the WPS option.

  • Step 5: Once you complete the configuration successfully, the WPS light on your wireless router stop blinking. Also, the WPS light on your extender will turn solid green.

  • Step 6: Use ap.setup for the setup process if your router does not support the WPS.

Ap.Setup Using WPS Method

Troubleshooting Tips for AP Setup Wizard is Not Working

Ap.setup is the offline webpage that enables you to connect with the router, extender, or ap device. So, it does not matter which device you are using. You just need to connect with the network and then access the login page. In case, you are facing a problem in accessing the ap.setup page then follows the below steps to resolve the ap setup wizard not working issue:

wifi wavlink com
  • Step 1: Ensure that you have entered the correct web address. Use http://sp .setup rather than ap.setup.

  • Step 2: Try to use some other web browser for accessing ap.setup.

  • Step 3: Make sure that the web browser that you are using is updated to the latest available version.

  • Step 4: Before Ap.setup Extender login, you need to ensure that you are connected to the WiFi device.

  • Step 5: Try to use the WPS setup method rather than web browser setup by just pressing the WPS button on your wireless router and then on the extender within 2 minutes.

  • Step 6: Unplug the extender which you are trying to set up for some time and then plug it again.

  • Step 7: If none of the above steps works for you then reset your extender to the factory default settings.