Linksys RE9000 Setup
Want to enjoy an uninterrupted internet connection at your home? If yes, then you need to perform the Linksys RE9000 Setup to eliminate the WiFi signal dead zone. This tri-band WiFi range extender provides 3x more speed than the dual-band WiFi range extenders because Linksys RE900 WiFi range extender supports the MIMO-MU technology. This extender extends 2.4GHz and 5GHz at the same time. If you want to know how to set up the Linksys re9000 extender, then this blog is for you only. Keep reading the blog and follow the below-mentioned step-by-step instructions to complete the Linksys RE9000 Extender Setup. Let’s get started.
Methods to set up the Linksys RE9000 WiFi range extender
There are two methods to set up the Linksys RE9000 WiFi range extender:
- Manual method.
- Through WiFi protected setup (WPS)
Steps to setup the Linksys RE9000 WiFi range extender through manual method
Go through the below-mentioned steps to set up the Linksys RE9000 WiFi range extender through the manual method:
Step 1: First and foremost, connect your Linksys RE9000 WiFi range extender to the power source and power it on.
Step 2: Now, grab an ethernet cable and connect your Linksys extender to the WiFi home router through this cable.
Step 3: After that, turn on your computer or laptop and connect to the WiFi network through an ethernet cable or wirelessly.
Step 4: Then, launch any preferred internet browser on your device and navigate to the official website of Linksys extender.
Step 5: On the login page, enter your user ID and password in the required field and tap on the login button.
Step 6: Now, a series of instructions will display on your device screen. Follow these on-screen instructions to complete the setup of Linksys RE9000 WiFi range extender.
Step 7: After completing the Linksys RE9000 WiFi range extender setup, unplug your extender and plug it halfway between the router and the WiFi signal dead zone.
Steps to setup the Linksys RE900 WiFi range extender through a WPS button
The WPS method is the easiest way to set up the Linksys RE9000 WiFi range extender. You just need to press the WPS button on the extender and router. Walkthrough the below-mentioned instructions to set up the Linksys RE9000 WiFi range extender through a WPS button method:
Step 1: First of all, connect your Linksys RE9000 WiFi range extender to the wall socket and turn it on.
Step 2: Now, locate and press the WPS button on the Linksys RE9000 WiFi range extender.
Step 3: After that, you need to wait for a few seconds and then release the WPS button.
Step 4: In the next step, press the WPS button on the router within two minutes after pressing the WPS button on the extender and wait for a solid green light.
Step 5: Finally, you can unplug your Linksys RE9000 WiFi range extender and plug it halfway between the WiFi router and WiFi signal dead spots.
Steps to setup the Linksys RE9000 WiFi range extender as an access point
If you want to configure your Linksys RE9000 as an access point, then go through the below-mentioned steps:
Step 1: To begin with, plug your Linksys RE9000 WiFi range extender into the wall socket and then power it on.
Step 2: When you see a green light on your extender, connect your WiFi router and Linksys extender through an ethernet cable.
Step 3: After that, launch any compatible web browser on your computer or laptop and navigate to the official website of Linksys extender.
Step 4: Then, move to the Linksys range extender installation page and tap on the start setup button.
Step 5: In the next step, you need to select the access point option and proceed with the on-screen instructions to connect your Linksys RE9000 WiFi range extender to the router.
That’s all! If you think that the Linksys RE9000 Setup is too technical, follow the steps mentioned above. These steps are too easy to follow. Follow these steps to set up Linksys RE9000 and enjoy uninterrupted browsing. Still, if you are facing any issues with Linksys RE9000 Extender Setup even after following the above steps, then feel free to contact us.
