get setup

Get High-Power Network Range Extension With

There are so many network range extenders available in the market. But, are they actually extending your network range to the maximum? Most probably, there is not much effect to the range. So, you can use the Amped Extenders and complete the amped wireless setup to have the high-range network extension. There are very simple steps that you need to complete with, and your network is extended. With Amped wireless extenders, there is no need to have multiple extenders at home for the extension of the network. This single extender is enough to boost your network. So, let’s get started with the setup guide!

Extend Your Network With

One always tries to have the steps that are not confusing and easy to follow. In this section, the steps for the amped wireless setup are simplified by dividing it into 9 sub-sections. So, go as per the steps mentioned below, and get the extended network as the end result.

Step 1: Find the optimal location for your Amped wireless extender.

  • Search for the area where the signal is weak for your WiFi.
  • Then, choose the common halfway for all the points so that you can have the optimal location for all points.
  • Make sure that optimal location must be receiving the signal more than 70% from the existing WiFi.
  • After finding the perfect optimal location, connect the Amped range extender to the power source there.
  • Turn on your Amped wireless range extender by pressing the Power button.

Step 2: Connect your Setup System to the Amped extender’s network.

  • Attach the antenna given along with the Amped extender if you have not connected it yet.
  • Then, start the system in which you want to complete the setup.
  • Disconnect it from the existing WiFi network.
  • After that, connect it to the Amped extender’s network.
  • If the prompt appears, select the option to connect it without setup.

Step 3: Launch Web Browser.

  • Make sure your system is not connected to any other network except Amped Wireless Extender’s network.
  • Then, launch the desired web browser like Google Chrome (recommended).
  • Now, enter the setup address as in the URL field.
  • Press the Enter key on the keyboard.

Step 4: Dashboard or Admin Panel for Amped Extender will open.

  • The first screen on the dashboard will show you the current status of your extended network.
  • You will see “No Connection” being displayed on the screen.
  • Also, you will find the Scan button to scan for the available WiFi networks.
  • Click on the Scan button to start the setup procedure.

Step 5: Select the required Home WiFi network for an extension.

  • Now, you will see the list on the screen for the available WiFi networks.
  • The strength of the signal being received for the extender will also be mentioned in the list.
  • Check the strength of your Home WiFi network as it should be more than 70%.
  • Now, if it is more than 70%, then select the name of your Home network. Otherwise, relocate your extender.
  • Click on the Next button to make the other necessary settings.

Step 6: Make the necessary Security settings for your Amped extended network.

  • If your home WiFi network is password protected, then a prompt will appear asking for a password.
  • Now, enter the current WiFi password in the required field.
  • If there is no password, and your network is open, then leave the password field blank.
  • Click on the Next button to move to the further steps.

Step 7: Do the required configuration for your Amped Wireless Extended Network.

  • If you are using the dual bandwidth, then you will see the name of your extended networks on the screen.
  • In order to have the same network name and password as that of the home network, then, select Clone.
  • Otherwise, set the network name and password as you wish in the required fields.
  • Click on the Next button and wait for the new settings to get applied.
  • Wait for the countdown to get complete, and don’t refresh or leave the page in between.

Step 8: Connect Your Wireless Device to the Extended Network.

  • When the countdown is going on, the extender will get a reboot or get disconnected, don’t panic.
  • On the disconnection, reconnect your device again with the Amped wireless network.
  • Go with the on-screen instructions to get connected to the wireless network.
  • On establishing the successful connection, select the check box in order to confirm the successful setup.
  • Click on the Next button.

Step 9: You will see the Setup Summary page.

  • If you have completed the setup properly with the above-mentioned steps, then the setup summary page will appear.
  • Now, you can connect your other wireless devices with the Amped Wireless Extended network.

Amped Extends Home Network!

In the bottom line, it can be said that you can complete the amped wireless setup so easily with these steps. Just enter the link, and go with the instructions, that’s it. If you will follow the steps in this way, then there are no chances of error. So, extend your Home network with the Amped Wireless Setup and get the power-packed home network.