Wavlink AC1200 Setup


The Wavlink AC1200 is a dual-band wireless router that provides quick and dependable Wi-Fi connectivity. It is suitable for a variety of online activities, including streaming, gaming, and surfing, because it supports both 2.4GHz and 5GHz bands. Additionally, it offers a combined speed of up to 1200Mbps. It has several antennas and cutting-edge technology, guaranteeing increased coverage and decreased interference for a seamless wireless experience. If you have recently purchased Wavlink AC1200 and are looking for its setup, then this blog is for you. It will offer information on the Wavlink AC1200 setup.

Wavlink setup is easy, and you can perform it using different methods. All these methods are easy and convenient and will help you establish a secure connection with your wavlink setup.

Wavlink AC1200 Instructions for Setup

You need to go through the Wavlink AC1200 setup instructions so that you can quickly establish a secure and safe connection. Below are the setup instructions that you need to follow before proceeding with the actual setup:

  • First, ensure that you have Wavlink AC1200 setup prerequisites covered. 

  • You must have login credentials along with a username and password for your Wi-Fi-enabled device.

  • You can connect to our support team if you have no idea how to proceed with the AC1200 setup. 

  • In case you get stuck in the middle of the configuration process, then there is no need to try it repeatedly because the device may get harmed.

  • The setup process is quite frustrating. Do not panic if it takes time, or you can call our expert team for assistance. 

  • Finally, confirm that the setup is done correctly by testing the network.

wifi wavlink com setup

WiFi Extender Setup of Wavlink AC1200 Setup Using Router

wavlink setup

The Wavlink AC1200 setup using the router is easy, and you can do it in just simple steps. For this method, you need to ensure your WPS compatibility. To learn about this method, follow the below steps:

  • First, plug in the extender to an outlet and wait for some seconds to start it up. 

  • Now, the extender will flash a red light and hit the WPS button on your home router for five seconds.

  • Then, you need to hold the button according to the device you have for the extender. 

  • After five seconds, the Wi-Fi signal will change LED lights and start to flash it. 

  • Now press the WPS button on the extender for around 6 seconds until it starts to flash a blue light.

  • It shows that the extender is communicating with our router.

  • At last, when the blinking red lights turn into solid blue, the Wavlink AC1200 setup is complete.

WiFi extender setup of Wavlink AC1200 Using Web Browser

Follow these instructions to connect the Wavlink AC1200 extender using a web browser:

  • A power outlet should be connected to your A1200 Wi-Fi range extender.

  • Now, your extension has to be set up to repeat.

  • Then, go to the WIFI settings on your tablet or laptop.

  • Then, find the Wavlink-N network and connect to it.

  • After establishing a connection to the extender network, open any web browser, such as Microsoft Edge, Mozilla Firefox, or Google Chrome.

  • Now type wifi.wavlink.com or into the address box and press Enter.

  • The Wavlink AC1200 configuration page can be viewed.

  • Now, as directed on the screen, connect your extension to your home network.

Wavlink range extender setup,Wavlink AC1200 Setup

Setting up a Wavlink AC1200 extender manually

By following the instructions listed below, you can complete the Wavlink AC1200 setup on Internet Explorer:

wavlink wifi extender setup
  • First, place your router and Wavlink wireless extension in the exact location.

  • Now, make sure that the extension receives at least 50% of the signals from your router.

  • Now switch on your router as well as the extension.

  • After a little period, check to see if the LED light is steady or solid green.

  • Then, connect to the wavlink ac1200 extender configuration after accessing your laptop, desktop, or mobile device’s Wi-Fi settings.

  • There is no need to input a password the first time because they will connect to your device immediately.

  • For the first time, do not attempt to indicate that the internet was accessible after creating a connection.

  • Before starting any web browsers after establishing a connection, they made no sign that the internet was available.

  • You can enter 192.168.10 in the address field at the top instead of http://AP.Setup. 

  • Then enter your login name and password, which both must be “admin”.

  • After that, select the extender you want to use to connect to your router and enter the new extender setup password.

  • Then, you need to turn off the extender for 15 to 20 seconds after setting it up and turn it on again.

  • Lastly, use the wavlink Wi-Fi range extender configuration to connect your device; it is identified as “SSID EXt” in your Wi-Fi list.

Wavlink AC1200 Configuration Through App

The wavlink AC1200 setup can also be done using an app. To establish a connection with Wavlink AC1200 through the app, use the below steps:

  • First, you need to install the Wavlink Wi-Fi app either on your phone or device. 

  • Now open the app and agree to its terms and conditions.

  • Then, the app will take you to the Wavlink AC1200 configuration portal.

  • After that, you need to enter the default login details and choose the network you want to extend. 

  • At last, the app screen will take you to complete the Wavlink AC1200 setup.


We have briefed you about the Wavlink AC1200 setup. With our comprehensive guide, you will be able to set up your Wavlink AC1200 on your own. However, if you encounter trouble, you can get in touch with our team for easy assistance. Our expert guidance connects with us through call, email, or chat.


1. What is the AC1200 Mbps?

The top combined wireless speed of a Wi-Fi router or access point is AC1200. 1200 megabits per second (Mbps) is the theoretical maximum speed, which is split across the 2.4GHz and 5GHz frequency bands. An AC1200 router typically provides 2.4GHz and 5GHz speeds of up to 300Mbps and 867Mbps, respectively, for a total of 1200Mbps.

2. An AC1200 is a router?

Instead of referring to a particular router model, the term “AC1200” is frequently used to represent the wireless speed capabilities of a Wi-Fi router. When you combine across both the 2.4GHz and 5GHz bands, routers designated as AC1200 can give wireless rates of up to 1200Mbps. These routers are made to provide a reasonable combination of speed and coverage for ordinary home or small office use. 

3. How quickly is the AC1200 router?

Depending on your unique requirements and the amount of devices connected to your network, an AC1200 router may not be fast enough. Many home and small office settings are suited for AC1200 routers, which offer sufficient speed for activities like web browsing, streaming HD video, playing online games, and regular internet use. However, you might take into account a router with a higher speed rating, such as an AC1750, AC1900, or higher, if you have a lot of devices or need even faster speeds for bandwidth-intensive activities.

4. How should my AC1200 wireless router be connected?

Observe these procedures to connect your AC1200 wireless router:

  • Start with turning on your router by plugging it in.
  • Now, join the Wi-Fi network provided by the router with your computer or mobile device. The default network name (SSID) and password (commonly called the Wi-Fi key) can be found in the router’s manual or on a label on the device itself.
  • To verify that you have internet connectivity, open a web browser once you are connected and try to access a website.

5. How do I get my Wavlink connected to the Internet?

Observe these procedures to join your Wavlink router to the internet:

  • Using an Ethernet cable, join your modem to the router. Connect one end to the LAN port on the modem and the other to the router’s WAN (Internet) port.
  • Turn on the router and modem simultaneously.
  • Then, allow them to connect for a few minutes by waiting. The router must recognize and set up the internet connection on its own.
  • You should be able to use devices connected to your Wavlink router to access the internet after the connection has been setup.

Also CheckoutWavlink WiFi Extender Setup